Welcome! Explore our high-quality audio equipment below. Our inventory is always being updated, so check back often.
Horn type tweeter developed for the mid-range of D series.
The D series is a series that uses plastic edges. A thin polyester resin plate is attached to the edge with corrugating by heat molding. By installing the corrugating by heat pressing, edge squeal due to edge resonance is suppressed.
The 55 Series is equipped with a vibration plate behind the magnet so that the sound can pass through the center of the magnet for rationalization.
Hard duralumin plate is used for the dome of the diaphragm.
Specs:
Type: Horn type tweeter for mid-range
Frequency band: 200 Hz to 7 kHz
Impedance: 8 Ω
Max Input: 30W
Output sound pressure level: 102dB
Specs:
Type: Horn type tweeter for mid-range
Frequency band: 100 Hz to 6 kHz
Impedance: 8 Ω
Max Input: 20W
Output sound pressure level:
Specs:
Type: Horn type tweeter for mid-range
Frequency band: 100 Hz to 7 kHz
Impedance: 16 Ω
Max Input: 15W
Output sound pressure level:
Reproduction of YL Acoustic EL-250 Horn
| Model | Type | Frequency Band | Impedance | Max Input | SPL |
|---|---|---|---|---|---|
| YL D-5500 | Mid-Range Horn Tweeter | 200 Hz – 7 kHz | 8 Ω | 30W | 102 dB |
| YL 551 | Mid-Range Horn Tweeter | 100 Hz – 6 kHz | 8 Ω | 20W | N/A |
| YL 5500G | Mid-Range Horn Tweeter | 100 Hz – 7 kHz | 16 Ω | 15W | N/A |
| EL-250 (Orig) | Horn | N/A | N/A | N/A | N/A |
| EL-250 (Repro) | Horn | N/A | N/A | N/A | N/A |
| Bass Cabinets | Speaker Cabinet | N/A | N/A | N/A | N/A |
Note: Specs listed as "N/A" are either not measured or does not apply or vary based on custom configuration. Contact me directly for full details.